Lesrt vpn

As a follow up to this post that I wrote a while back, one of things I have been thinking of doing is to have a reliable uninterrupted power supply. The setup is powered by a typical run-of-the-mill power bank which supports passthrough. However, these batteries typically rely on a mechanical relay which introduces a short break when the power switches from battery to mains supply. The unfortunate outcome is a hard power cycle of the RPi during power cuts that is pretty common in this part of the world! So, without further ado, let's look at our options.

Lesrt vpn

Let's consider this simple circuit.

V1 simulates a pulse to show a sudden voltage drop to 0 (simulate a blackout). D1 and D2 are regular silicon diodes with a forward voltage of 0.7v. While the circuit protects the battery from getting damaged when mains is powering the RPi, the voltage drop brings the output voltage down significantly. We can replace these with germanium or Schottky diodes that have lower forward voltage drops. However, these come at the expense of higher reverse leakage currents and lower stability with temperature variations. Let's try something else.

Lesrt vpn

A MOSFET can act as a switch with a lower forward voltage drop. Let's modify our original circuit and include a P-MOSFET.

There are two issues here – First, our diode problem still remains and second, M1's drain to source path will try to charge the battery which may be undesirable. To understand why we need the diode, let's take a look at how the MOSFET operates. The P-channel of the MOSFET stops conducting when a positive gate voltage is applied. Now, if V1 were to turn off, M1 turns on and OUT now sources the battery. In the absence of the diode, the gate will be at the same potential as OUT which will turn it off!

Could we replace the diode D1 with another MOSFET ? Let's take a look at a simplified circuit that does that.

There's an important thing to point out – the MOSFETs are rotated, meaning, the source is connected to the point where drain should have been connected and vice versa. So, current always flows from drain to source. Or in other words, the semiconductor acts more as an off switch and simulates and ideal diode. But does it really work ? When V1 is on, there's a positive gate voltage at M2 and so current cannot flow into V2 and damage it. When V1 is 0, M2 is on and conducts in both directions.

国外的同志交友app_国外最流行的同志软件_多特软件站 ...:2021-6-6 · 同志交友 软件集合包含各种高质量和流行的同性恋交友应用程序。 竭诚为您的同龄人提供 社交软件。Ta似乎和他在一起；即时聊天，语音和文本，无论他想要什么；没有作弊，安全的身伇验证，真诚的朋友；让更多的人更好地看到你。

As mentioned above, M2 and M3 are the MOSFETS connected back-to-back and Q1 and Q2 form a differential pair. When V1 is active, Q1 conducts and M3 is off. This prevents current to flow out of V2. When V1 is off, Q2 conducts first which in turn will turn off M1. The battery now powers on the circuit. Let's take a look at a few use cases -

1. V1 = 5V > V2 = 4.8V Here, Vout is V1 – the forward voltage drop, so we are good.

2. V1 = 4.8V < V2 = 5V Even though V1 < V2, it still takes precedence.

3. V1 simulates a blackout – on/off/on. When V1 is on, it drives the output. V2 takes over at t=2 and until t=6.

In the next part, we will decide on taking this circuit out on a drive in the real world and/or investigate solutions that already do this job such as the CAT6500 (now obsolete!).

#怎么上国外网 #diy #哪些方法可伍浏览国外网站 #mosfets

A while back, my rusty Sans Digital TowerRAID gave up. Honestly, it had not been a very expensive investment, presumably, at the cost of reliability. Nevertheless, I got a few good years out of it. From the looks of it, it looked like the power supply failed and although, I could have replaced the power supply board, I decided to venture out for future proofing my storage requirements.

Lesrt vpn

Pretty much everything out there comes at a price of greater than $500 for a 8 slot JBOD. Most of them don't have decent reviews and the ones that do are usually more expensive. That led me to the other option.

Lesrt vpn

I wanted to explore this option before I splurged on a brand name enclosure. Luckily, there were many helpful resources^1^2 available that led me to believe this is indeed a possibility. Below, you will find a BOM of what went into my DIY JBOD. The heart of the device is a RAID expander. Ofcourse, you also need to invest in a decent enclosure that houses everything.

RAID Expander ~$60

值得付费相约的十款WIN系统小软件:1 天前 · 软件我伊习惯使用免费的，然而这些值得支持的小软件值得你付费。 1.Listary. Listary提供了免费版和付费版，很多的人觉得这是一个单纯E

国内怎么上国外网站

This one's optional in my opinion but it does make the whole setup a little more polished. The one that I used is a SuperMicro CSE-PTJBOD-CB2, again, pretty easily available on Ebay. What this does is let you use the enclosure switch to control power to the system. This would not have been possible otherwise, without a motherboard.

Mini SAS SFF-8088 to SFF-8087 Adapter ~ $25

This will be our portal to the outside world. The SFF-8088 cable (that I already have) will connect the expander to the initiator on the server. The one that I got(CableDeconn) conveniently fits into a full height PCI slot on the enclosure.

SFF-8087 to 4 SATA ~$20

This goes from the RAID expander to the backplane in the enclosure that we will use. Since I plan to use 8 disks, I got two of the cables.

SFF-8087 to SFF-8087 cable ~$8

This cable connects the expander on one end and the SFF-8088 to SFF-8087 adapter on the other end.

Power supply ~$50

Nothing special here, I used a 430W 80+ ATX supply but that's more than what you would need.

手机怎么浏览外国网站

This was the most expensive buy for the project but it's worth it. I decided on a SilverStone CS380B which doesn't have stellar reviews, to be honest, most complained about unsatisfactory ventilation but I was sure I would be fine because I wouldn't install a motherboard in it.

Fitting everything together

The enclosure already has a backplane for the disks. The RAID expander card as well as the SFF-8087 to 8088 adapter both went into a slot on the enclosure where a full height card would usually go. I had to drill some holes so that the power board could stay in place.

Here's a pic of the innards after everything has been fixed in place:

Total cost and troubleshooting

Total cost comes out to be ~$400 which is still a good price for a system that can house more than 8 disks (The Silverstone has internal bays for a few more).

There's nothing here that could go wrong. Everything's pretty much plug and play. The only thing worth noting is that the expander card has been discontinued and there's probably not a lot of them out there. You might end up getting a dead card. If things don't work out as expected, just blame it on the card and get a replacement! :)

My setup has been going strong for a few months now. I am glad I went this route!

#tech #diy #jbod

My Dad had a specific set of requirements from a security camera he wanted for our home back in India. When I researched between options, on whether to buy one or to build something, I stumbled upon many builds based on the Raspberry Pi. Most successful builds run 现在上国外的网站加速软件 on top of a RPi board, or maybe, even Motioneye for a friendlier UI. This post summarizes the issues that I/you are likely to face and what I did about them.

Lesrt vpn

I used a RPi 3 B board that has a 1.2 Ghz quadcore ARM processor. For processing a video stream and running the motion detection daemon, it's not really very capable and you would end up with stuck/unusable frames on your stream. One of the things that makes a huge difference is the incoming stream frame rate and resolution. I got the best results with sliding down the incoming frame rate to as low as 10 on the camera that I am using.

Lesrt vpn

怎么上国外网站,比如YouTube-ZOL问答:怎么上国外网站,比如YouTube 问在线客服 扫码问在线客服 回答数 7 浏览数 12,852 回答 关注 7个回答 ... 按时间排序 dsfhsdhgx 已采纳 要注册VPN 评论 取消 评论 223456abcdefg 直接设置VPM就行，用云末加速 ...

Lesrt vpn

As mentioned above, this was an important requirement. I used a 20000 mAH battery that has passthrough. On the downside, when passthrough triggers, there's a momentary disconnect in power which restarts the camera and the RPi which is undesirable but the small downtime is acceptable.

Lesrt vpn

One of the requirements was failover to a backup network but jumping back to the main network once it's back up. A reverse tunnel to a public IP takes care of ssh and http access and could be easily scripted as well. HTTPS is achieved by setting up a nginx reverse proxy on the public facing system and integrating with letsencrypt.

Motion detection

False positives is a major challenge and I could get a good compromise with a mix of a few things: – Setting up a manual mask. This is easy to do with the motioneye http interface. – Using a despeckle filter. Take a look at this article for a nice write up by the author. After experimenting with several combinations, EedDl gave the best results (which also happens to be the recommended starting poin). – Experimenting with thresholds. I used the threshold_maximum parameter to minimize the maximum pixel change. A script changes the threshold value based on input from a LDR similar to this setup.

Usability

The system is easy to use/configure with the Motioneye http interface but to make it a little bit more interesting, I used some NFC tags to enable/disable motion detection. This can be easily done with Tasker along with the NFC plugin for it. This script takes care of syncing up the config file with the current state of motion detection.

#thoughts #tech #diy #rpi #现在上国外的网站加速软件

Large file transfers with Media Transfer Protocol (MTP) are very mysterious. The most common search results are about Android users having difficulties with transferring large files and while, this has nothing to do with the MTP specification itself and more to do with the largely deficient Android MTP implementation, MTP typically bears the users' wrath. I believe that part of the stigma associated with MTP has to do with Microsoft being instrumental in its inception. There are some others, for example, the name could have been better! (A person, apparently a storage expert, was actually unaware that Media Transfer Protocol, while focused on media files can actually handle other file types as well!). As to why Android decided MTP to be the default file system is something we can get into in another post but for now, let's get back to the curious case of large files.

The MTP spec could use some clarity for the section on writing large files. The fundamental issue with writes being that the MTP object metadata uses a 32 bit unsigned integer for the file size which limits the file size. The spec mentions that for a file size > 4GB, the size should be set to 0xFFFFFFFF. However, it doesn't clearly specify how to manage the transfer itself (when/how to stop!).

So, can you transfer a > 4GB file with MTP ? Yes, you can and there are two ways to implement it. The first is to use a ObjectPropList, specifically, support SendObjectPropList. This operation has a 8 byte field for object size. However, ObjectPropLists may not be supported by a lot of initiators and even if they are, initiators may decide not to use them for write support.

The second method is mostly reliant on the transport mechanism that MTP mostly relies on, USB. It probably even makes the file size field in the object metadata an optional item. USB guarantees that the end of the data phase will be marked by what is called a short packet. A short packet is a data packet whose size is less than wMaxPacketSize specified by the endpoint descriptor, basically the size of the data buffer in the endpoint. The snippet to handle the write operation in the responder could be something like:

“免费上网”在国外 - People:2021-2-21 · “免费上网”在国外 2021年免费的互联网访问设备和软件的使用在欧美等发达国家已很流行。 根据国际数据公司IDC的分析师的预测，免费上网服务也会因此越来越流行。估计今后两三年内，上网需交费在美国将成为历史 ...

There's a small hiccup here though. Typically, USB controllers will try to fill up their buffer before sending the data out. So, the above “if condition” may become true even before the actual end of the data phase and mark an incorrect end of data phase. Fixing this is easy though and relies on the fact that the incoming data size will be a multiple of 64 unless it's the end of the data phase:

  total_size += incoming_datasize;
  if ((incoming_datasize % 64) != 0) {
    /* This is the last packet in this data phase */
    write_buffer_to_file();
    free_buffer();
  }

#tech #programming #qemu #mtp

As a newbie programmer, recursion took some time getting used to and once something worked, it usually appeared like magic. So, when working on an evening Lisp project, nostalgia kicked in and encouraged a little bit of exploration!

手机电脑如何轻松访问Google，Youtube，Facebook网站(三 ...:2021-7-6 · 现在我伊大多数的手机电脑无法直接上Google，Youtube，Facebook等网站，这种现象是从2021年开始的，很多想上外网的用户，有些是做外贸的，有些是程序员，还有一些是学生，他伊想看谷歌学术论文或者做生意，但是都不知道如何上google网站 ...

int nth-power(int number, int n)
{
    if (n == 1)
        return number;
    else
        return number * nth-power(number, n - 1);
}

The Lisp (elisp) version is easy enough and almost identical:

(defun nth-power (number n)
   (let* ((result number))
   (if (eq n 1)
        number
        (setq result (* result (nth-power number (-n 1)))))
        result))

This works for small numbers but let's try a large number:

(nth-power 200 10000)
Debugger entered--Lisp error: (error "Lisp nesting exceeds `max-lisp-eval-depth`")
...

IDM - 最佳的 Windows多线程加速下载工具[正版特惠 ...:1 天前 · Internet Download Manager IDM下载器是一款先进的下载工具,可伍提升您的下载速度高达5倍,支持续传，IDM 可伍让用户自动下载某些类型的文件，它可将文件划分为多个下载点伍更快速度下载，并列出最近的下载，方便访问文件。

(nth-power 200 10000)
(SB-KERNEL::CONTROL-STACK-EXHAUSTED-ERROR)

However, if we slightly modify the program to look like this:

(defun nth-power (number n acc)
   (let ((result (* number acc)))
     (if (eq n 1)
          result
     (nth-power number (- n 1) result))))

The result is:

现在怎么上国外网站

电脑怎么浏览国外网站:2021-6-13 · 用VPN.在我的百度空间有一款,你看看,个人一直在用,速度不错,有6个IP可选,建议先不买,免费用用先,好的再买.包年的话会比包月划算好多,电脑,手机IPHONE,上Facebook,推特等国外网站或者国外游戏服务器加速都可伍了上.当然免费的也可伍用到手机上的.呵呵

Notice how the recursive call is the last statement in the above definition. That enables the compiler to do a Tail call-optimization. In simple terms, it means that the stack from the previous call can be reused and won't grow over time.

电脑怎么浏览国外网站:2021-6-13 · 用VPN.在我的百度空间有一款,你看看,个人一直在用,速度不错,有6个IP可选,建议先不买,免费用用先,好的再买.包年的话会比包月划算好多,电脑,手机IPHONE,上Facebook,推特等国外网站或者国外游戏服务器加速都可伍了上.当然免费的也可伍用到手机上的.呵呵

0] (disassemble 'nth-power)
; disassembly for NTH-POWER
					; Size: 130 bytes. Origin: #x1001F8EBC9
...
; C18:       488B0559FFFFFF   MOV RAX, [RIP-167]              ; #<SB-KERNEL:FDEFN NTH-POWER>
; C1F:       B904000000       MOV ECX, 4
; C24:       48892B           MOV [RBX], RBP
; C27:       488BEB           MOV RBP, RBX
; C2A:       FF5009           CALL QWORD PTR [RAX+9]
; C2D:       480F42E3         CMOVB RSP, RBX
; C31:       488B75E0         MOV RSI, [RBP-32]
; C35:       488BFA           MOV RDI, RDX
; C38:       488BD6           MOV RDX, RSI
; C3B:       41BB80030020     MOV R11D, 536871808             ; GENERIC-*
; C41:       41FFD3           CALL R11
; C44:       488BF2           MOV RSI, RDX
; C47:       EB98             JMP L0
; C49:       CC10             BREAK 16                        ; Invalid argument count trap

Notice how recursion is implemented with the call instruction on line C2A. This signifies switching to a new stack frame. In contrast, with our modified nth-power program, we have:

0] (disassemble 'nth-power)

; disassembly for NTH-POWER
; Size: 105 bytes. Origin: #x1001E67663
...
; 98: L0:   488B55E8         MOV RDX, [RBP-24]
; 9C:       BF02000000       MOV EDI, 2
; A1:       41BB10030020     MOV R11D, 536871696              ; GENERIC--
; A7:       41FFD3           CALL R11
; AA:       488BFA           MOV RDI, RDX
; AD:       488B5DD8         MOV RBX, [RBP-40]
; B1:       488B55F0         MOV RDX, [RBP-16]
; B5:       488BF3           MOV RSI, RBX
; B8:       488B0549FFFFFF   MOV RAX, [RIP-183]               ; #<SB-KERNEL:FDEFN NTH-POWER>
; BF:       B906000000       MOV ECX, 6
; C4:       FF7508           PUSH QWORD PTR [RBP+8]
; C7:       FF6009           JMP QWORD PTR [RAX+9]
; CA:       CC10             BREAK 16                         ; Invalid argument count trap

The call instruction has been replaced with a jmp on line C7. This signifies that the stack size won't grow as was the case with the call instruction.

Note that, when using optimization with gcc, it will always try to optimize tail calls. It's easy to experiment with the optimization switches(-O0 -O1 -O2) and check the generated assembly code.

#lisp #programming

Sometime in 2012, I made up my mind that I was done with my Bitcoin stash. I had a small collection, which at that time I thought wasn't much. Those were the good old days; I remember websites giving you free coins just for visiting them. Back to the point, I said to myself: “If I needed them later, I will get them again but for now, there's no sense in holding onto them”. So, off I went, transferring my coins to a [presumably] very reputable 手机怎么浏览外国网站 and sell them for cash. Alas, before I could blink, I saw my account getting drained in small increments. It was almost like a scene from a popular CSI episode that nerds would make fun of for being too good to be true! Well, money was lost and I tried to wipe the experience from my memory somehow believing that it's just a matter of time before cryptocurrencies would be dead anyway. Boy, was I wrong!

Not only have many alt-coins of varied popularity sprung up with large communities thriving around them, they are getting unusual attention, both good and bad from researchers to financial organizations to oppressive governments. And while their fate is still a bit uncertain, news of breaches and stolen bitcoins are still not uncommon. One begs the question: Are cryptocurrencies really solving a problem and introducing another ?

Researchers are often so engrossed in solving a specific problem that they seldom look at the potential advantages of the bad by design (no pun intended) problem. And the cryptocurrencies solution seem to fall into this category. Ofcourse, Anonymity and Decentralization all sound like a step forward and they might be inherently desired but do they always work for the better ? Probably not. One of the many reasons why you don't hear about major breaches at your local bank is because by design, paper currency and the economy that encompasses it make transactions trackable. So, while they do expose your identity which might be undesirable in the greater scheme of things, maybe, a medium of exchange system could mostly benefit from being easily trackable and controlled by a central authority for it to work fairly. It would be difficult to ignore the evidence that paper money's long and successfully history provides in support of this theory.

On the other hand, while the anonymity advantage that digital currencies offer does sound appealing, it's worth pondering if it contributes to making it more difficult to protect it as well. Allow me to explain with an example: A regular bank transaction, by definition, requires an 手机如何上外网 account holder. Even assuming that someone does hack into your account, there's a certain degree of responsibility that the exchange (read: the bank) has when it comes to protecting your investment. Ofcourse, once alt-coins get widespread recognition and there are standards put in place to protect users, this would be applicable to them too but that's exactly my point! With conventional currency, it's impossible for just anyone to setup an exchange without proper security protocols in place to protect users. That's because the creator of the currency (the government in most cases) has the authority over its usage and disbursement. On the other hand, with the decentralized nature of digital currencies, light regulations have led to rampant fraudulent activities. If there's any consolation, all attacks are on the associated services and not the core software and protocol. But to reiterate on my point, it's worth considering whether the large number of unpleasant hesists associated with bitcoins are directly proportional to the design intended to make it decentralized.

Understandably, it's easy to blame this thought on conservative bias. I do wonder however whether 手机如何上外网 and their applications are entirely two separate beasts and worth analyzing very carefully with differently colored eyeglasses. With our constant desire to improve our lives, I believe this ideology should be universally applicable. As a different example, let's consider Autonomous Driving too! Advances in Machine Learning is all good but can a machine's logic really replace the empathetic decision making of a human at the time of a crisis ? That's a topic for some other time!

#thoughts #tech #crypto